Start with the room and what you want to keep.
Hardwood and luxury vinyl plank solve different problems. In Middletown and Orange County the difference usually shows up under the floor, not in the sample you liked at the store. Orange & Oak Flooring works from a shop in Middletown, NY 10940. We meter the subfloor and check it with a straightedge before we name a product. This guide walks through how we think about the choice, so you can walk into the estimate already asking the right questions.

Where solid hardwood belongs
Solid oak belongs on a wood subfloor, above grade, in a room that stays inside a normal house temperature. Village blocks in Goshen, Chester, and Warwick still turn up narrow-strip oak under carpet — floors from the 1900s through the 1940s that are a refinish or a board repair when the wood is thick enough, not an automatic rip-out. Where there is no floor, new solid oak brings the same long life: a floor that can be sanded and refinished several times over the decades, which is the real case for it. The cost of that longevity is time — solid oak needs acclimation in the house before it is nailed, and site-finished oak adds sanding and curing days. We do not bring bundles in from a cold truck and nail them the same hour.
Where LVP is the honest choice
Luxury vinyl plank earns its keep below grade and in hard-use rooms: basements on slabs, laundry rooms, rentals between tenants, kitchens with dogs and winter boots. Orange County basements take on humidity even when they do not flood, and solid oak cups down there every time. LVP does not cup. It also shrugs off road salt and grit in a way that finishes on oak simply do not — January entries are a real workload here. What LVP does not do is improve with age: a wear layer wears through, the photo layer is not wood, and a damaged plank gets replaced, not refinished. If the dream is a floor your grandchildren sand, that dream is oak.
Engineered hardwood sits between them
Engineered hardwood is a real wood surface on a plywood or high-density core. It moves less than solid oak, so it can go where solid should not — over a dry concrete slab, some basements, and homes with radiant heat in the floor — provided the product is approved for it and the readings cooperate. Thin wear layers limit future refinishing to a screen and recoat at best, so the wear-layer thickness on the spec sheet matters more than the pretty photo on the carton. We still meter before anything goes down. If the slab is wet, no wood product fixes that.
What we will not decide from a photo
A photo of the foyer does not show moisture, flatness, or what the subfloor is made of. Two rooms with identical square footage can price very differently because one has a waved plank subfloor from 1925 and the other has a flat, dry slab. That is why our answer to "which should I pick" is always "let us look first" — and why the written estimate names the product, the prep, and the reason for both. If you want the fuller picture on pricing before you call, read what affects flooring cost and our moisture testing guide.
What homeowners tell us
“We came in set on oak for the family room until they put a meter on the slab and showed us the numbers. LVP went down instead, and two humid summers later I am glad someone checked before selling me wood.”
Grace V. · Monroe · Guided from oak to LVP over slab“They did not talk us out of hardwood — they talked us into engineered for the slab addition and solid oak upstairs, and explained the wear-layer math on the spec sheet. Felt like advice, not a sales pitch.”
Kenji M. · Goshen · Engineered and solid, mixed homeRelated: Solid hardwood · Luxury vinyl plank (LVP) · Engineered hardwood · Flooring cost factors · All guides · FAQ.
Questions homeowners ask
Can you install solid oak in a basement?
Not as a rule. Basements and slabs are usually luxury vinyl plank (LVP) or, when moisture readings allow, engineered hardwood. Solid oak over a damp slab cups — we have the callback history to prove it.
Is LVP cheaper than hardwood?
Often on install day, not always over the life of the floor — hardwood can be refinished instead of replaced. The honest comparison is product plus prep plus how long you plan to keep the house. We write both options when you want them.
Will you sand a floor that is too thin?
No. If the boards or wear layer are too thin, sanding is the wrong job, and we will tell you before you pay for it.
Do you choose the product from a photo?
No. We meter the subfloor and check it with a straightedge first. A photo shows color, not conditions.
Which is better with dogs and road salt?
LVP takes the abuse better — scratches and salt haze are its home turf. Oak can be refinished when the wear shows, which LVP cannot. It depends whether you prefer to withstand or renew.
How do I get an estimate?
Call (845) 210-4477 or use the estimate form. Tell us the town, the rooms, and what is down now.
