Porcelain tile
Porcelain tile is denser and less porous than ceramic, which is why it belongs in kitchens, baths, entries, and mudrooms — the rooms where water, grit, and road salt actually live. This page covers what we set, how we prepare the floor so the tile does not crack, and what a tile job in an older Orange County house involves beyond the tile itself.
What our tile work is — and what it is not
We set porcelain floor tile in kitchens, baths, laundry rooms, entries, and hearths, and we build showers and wet-area floors with the right backer and waterproofing system. Tile and grout alone do not waterproof a room — the system under them does. We are not a tile showroom: you pick the tile, we prepare the base and set it straight. For wood floors in the adjoining rooms, see solid hardwood or LVP; for a tired wood floor elsewhere, refinishing may be the better spend.
What older Hudson Valley floors demand
Tile cracks when the floor moves, and plenty of local floors move. The 1920s–1960s housing stock around Middletown, Newburgh, and the villages often has plank subfloors over joists with some bounce, or old tile laid in mastic over who-knows-what. We check for flex and flatness first, add backer board where the assembly calls for it, and only then set tile. Freeze-thaw entries take a beating from boots and salt — a porcelain body with the right slip resistance matters more there than a pretty glossy glaze. And mudrooms off garages need honest waterproofing at the threshold, because meltwater is a season, not an event.
How the installation runs
- Check the substrate. Flatness, flex, and what the existing floor is made of. Bounce or soft spots are fixed before tile, not hidden under it.
- Agree on layout and scope. Tile size, pattern, grout color, edge trim, and where cuts land — written on the estimate before thinset opens.
- Prepare the base. Backer board or the specified system, movement joints planned at hard edges and over structural seams.
- Set the tile. Thinset combed and keyed, leveling clips keeping neighboring edges even so no lip catches a toe.
- Grout, seal, and walk through. Joints filled and cleaned, edge trim installed, and care notes left with sealing and cure times.
What to discuss at the estimate
- Substrate flattened and stiffened first — and how, for your floor
- Layout before thinset, including where the cuts land
- Heated-floor mats, if you want one, scoped before the quote
- Grout color and edge trim included in the quote
- Who supplies the tile, and that boxes come from the same dye lot
What is included — and what costs extra
Included: the tile set in thinset, leveling clips, grout, edge trim named on the estimate, and cleanup. Extra: tearing out old tile, building a shower pan, rebuilding a rotten subfloor, and moving plumbing — those are separate lines, if we do them at all. Painting and trim repair after the fact are separate too. Call (845) 210-4477 or use the estimate checklist.
What affects the cost
Square footage and tile size drive the base — large-format tile takes longer to set flat than small squares, and patterns longer still. Prep is the swing factor in older houses: stiffening a bouncy plank subfloor with backer adds real time, as does tear-out of old tile. Heated floors add the mat, a dedicated circuit, and scheduling around the electrician. The only honest floor installation cost is measured on site, so call (845) 210-4477 and we will put the scope in writing.


