Solid hardwood

Solid hardwood is wood all the way through — the same species from the wear surface to the bottom of the board. This page is for homeowners in Middletown and across Orange County who are weighing a new wood floor over a wood subfloor: what the job honestly involves, when an older Hudson Valley house is a good candidate, and what changes the price besides the boards themselves.

What solid hardwood is — and what it is not

A solid board can be sanded and refinished several times over its life, which is the whole argument for it. We usually nail or staple it to a sound wood subfloor above grade. It is not the right product over concrete — that job belongs to engineered hardwood or luxury vinyl plank when the slab readings allow. And if the floor you already have is structurally sound but dull, that is sand and refinish, not a new install. Loose or split boards in an otherwise good floor may only need board repair.

When an Orange County house is a good candidate

Solid oak earns its keep in the housing stock this county is full of: village colonials in Goshen, Chester, and Warwick, center-hall foursquares in Middletown, farmhouses out toward Florida and Pine Bush. Most were built with wood subfloors, usually plank or diagonal boards over joists — exactly what solid hardwood wants. The catch is that a ninety-year-old subfloor is rarely flat or dry by modern numbers. Hudson Valley summers push humidity into crawlspaces — especially over the black-dirt farmland west of the village centers — and dry February heat pulls moisture back out. Boards move with both. So before we name a product we meter the subfloor, check it with a straightedge, and look at ventilation in the crawl or basement below. A damp base makes boards cup, with edges higher than the center. A wavy base telegraphs through everything.

How the installation runs

  1. Walk the rooms. We look at the subfloor from below if there is access, check flatness, and take moisture readings in the boards and the subfloor.
  2. Agree on the product and scope. Species, width, grade, site-finished or prefinished, transitions, and what is included — all written on the estimate.
  3. Acclimate the wood. The cartons sit in the house at living temperature and humidity until the meter says they match the room. A fixed number of days is not the test; the readings are.
  4. Prep and fasten. Loose or damaged subfloor panels are secured or replaced first, then the boards are nailed or stapled with expansion gaps left at every wall.
  5. Finish, if site-finished. Sanding, stain approval on a sample board, then the finish coats, with dry and cure times written on the work order.
  6. Walkthrough. We go over the floor with you, leave care notes, and confirm when furniture and rugs can come back.

What to discuss at the estimate

  • Moisture meter readings in the boards and subfloor before the first board goes down
  • Acclimation time written on the estimate, not promised as a fixed number of days
  • Site-finished or prefinished — and who sands between coats if site-finished
  • Stair noses and reducers matched to the new floor
  • Which rooms, which doorways, and where the transitions land

What is included — and what costs extra

The install includes fastening the floor, expansion gaps, and the transitions and trim pieces named on the estimate. Carpet and old-floor tear-out, disposal, moving furniture, and painting are separate unless they are written on the quote. Rebuilding a damaged subfloor is its own line — we measure for it before we quote it, not after the floor is open. If you want the treads and landing done with the rooms, say so at the estimate so the stair work is scoped together.

What affects the cost

Square footage comes first, then the product itself — species, plank width, and grade move the material number. Subfloor prep is the swing factor in older Orange County houses: flattening a wavy plank subfloor, replacing rotten sections near an old radiator, or adding height at a doorway all take time. Site-finished floors add sanding and finishing days; prefinished boards cost more per carton but skip that. Stairs, patterns, and borders take longer than a straight run. We do not publish starting-at prices because the subfloor decides the real number. Call (845) 210-4477 or use the estimate checklist for a written estimate — the number only counts when it is on paper.